Table of Contents
Advertisement
DATA
Status (Valid/IInvalid)
Latitude/Longitude
Speed
Course
Date
The radio can output the following NMEA sentences:
GGA
GSV
To connect to a chartplotter:
1.
Connect the WHITE wire to the NMEA positive (+) output.
2.
Connect the BLACK wire to the NMEA ground.
3.
Connect the YELLOW wire to the NMEA positive (+) input.
nOte: Use waterproof tape to seal electrical connections.
#
aDDitiOnal FeatUres
renaMing Channels
If you discover that a marine radio channel has a different common name in your local area,
you can change the name of that channel to make it easier for you to use (see the channel
lists beginning on page E-33 for the default channel names). To rename a channel, follow the
steps below:
1.
Press MENU/CALL and select Channel Name from the Normal menu. The screen
displays the list of channels.
2.
Use Channel Up and Channel Down to choose the channel you want to change
and press DSP/ENT H/M/L.
3.
Select Rename to enter a new name for this channel. The radio prompts you to enter
a new name for this channel. Each name can be up to 12 characters. Use Channel
Up and Channel Down to change the name.
4.
When you finish entering the name, the radio displays the new channel name and
asks you to confirm. To save this new channel name, select Save; to cancel the
E-30
RMC
DSC
GSA
Uniden MHS235 Radio Owner's Manual
GLL
GNS
O
O
O
O
O
O
O
X
X
O
X
X
O
X
X
RMC
DSE
WHITE - to NMEA (+) output
BLACK - to NMEA ground
YELLOW - to NMEA (+) input
GGA
ZDA
O
X
O
X
X
X
X
X
X
O
Advertisement
Table of Contents
