Configuring The Xmpp Server - Cisco ASR1002 - ASR 1002 Router Configuration Manual

Configuring the XMPP Server

The Extensible Messaging and Presence Protocol (XMPP) is an open, XML-based standard for near real-time
communication. Because XMPP provides near real-time communication among different platforms for
information distribution, it is the primary communications and transport protocol used between NPS
components.
Jabber is the implementation of XMPP that is installed with the NPS software. The configuration of Jabber
is described in this module.
•
Configuring the XMPP Server
Jabber is used to facilitate communication between PE routers for the purposes of service resolution. Use this
task to configure the Jabber server on one of the PE routers in your system. It is also used by the capability
directory (CD) to get device capabilities through the XMPP pubsub protocol. Generally, the Jabber server is
installed on the DCE-facing PE where the service resolution engine (SRE) is installed.
SUMMARY STEPS
1. jabber server
2. domain domain-name
3. ipaddr ipv4 ip-address
4. log-level level
DETAILED STEPS
Command or Action
Step 1
jabber server
Example:
switch(config)# jabber server
OL-25794-01
Configuring the XMPP Server, page 3
Cisco Network Positioning System Configuration Guide for the Cisco ASR 1000 Router, Release 1.0
2
C H A P T E R
Purpose
Enters Jabber configuration mode to configure the XMPP
server on the router.
3