Nps Configuration Examples; Ce-Facing Pe Configuration Example - Cisco ASR1002 - ASR 1002 Router Configuration Manual

NPS Configuration Examples

This module provides examples for configuring the Cisco Network Positioning System.
•
•

CE-Facing PE Configuration Example

This example illustrates the configuration of a CE-facing PE that has one MC-capable entity defined, and two
entities that are not MC-capable:
hostname ccnsr1.com
ip host ccnsr.com 172.16.0.2
xmpp server type pfm ccnsr.com
xmpp server type cd ccnsr.com
interface eth0
ip address 172.17.0.2 255.255.255.0
no shutdown
router ospf 10
network 172.17.0.0 0.0.255.255 area 0
pfm ce-facing
entity 1
entity 2
entity 3
pfm local-host 10.1.0.2
ce-table table1
ce-address ipv4 10.1.0.1
ce-address ipv4 10.1.1.1
ce-address ipv4 10.1.2.1
ce-address ipv4 10.5.1.1
ce-address ipv4 10.5.2.1
ce-table table2
ce-address ipv4 10.2.1.1 pfr-mc
ce-address ipv4 10.2.2.1
ce-table table10
ce-address ipv4 10.3.1.1 pfr-mc
ce-address ipv4 10.3.2.1
ce-address ipv4 10.3.3.1
wsma agent
host 10.1.0.2 username cisco password cisco
OL-25794-01
CE-Facing PE Configuration Example, page 27
DCE-Facing PE Configuration: Example, page 28
ce-table table1
pfr-mc disable
ce-table table2
pfr-mc disable
ce-table table10
Cisco Network Positioning System Configuration Guide for the Cisco ASR 1000 Router, Release 1.0
7
C H A P T E R
27