Description Of Each Component - Oki CX4545 MFP Quick Start Manual

Chapter 1 PREPARATIONS

Description of Each Component

This section describes the names and operations of the equipment, control panel and touch panel.
Front / Right side
1.
Reversing Automatic Document Feeder
(optional, MR-3022)
The stack of originals is scanned one sheet at a time. Both
sides of the originals can be scanned. A maximum of 100
2
sheets (80 g/m
(The maximum number of sheets that can be set may vary
depending on the media type of the originals.)
2.
Operator's Manual Pocket (back side, optional,
KK-1660)
Keep the manual in this pocket.
3.
Main power switch
Use this switch to turn the power of the equipment ON or
OFF.
P.13 "Turning Power ON/OFF
4.
USB port
Use this connector when printing files stored in a USB
device or storing scanned data into the USB device.
5.
USB terminal (4-pin)
Use this terminal when connecting this equipment to a PC
with a commercially available USB cable.
6.
Network interface connector
Use this connector when connecting this equipment to a
network.
7.
Automatic duplexing unit
This unit makes copies on both sides of the paper. Open it
when paper jams occur.
8.
Bypass tray
Use this to perform printing on special media types such
as OHP film, waterproof paper, etc.
P.25 "Bypass copying" in this manual
6
1
14
13
12
11
or 20 lb. Bond) can be placed in one go.
Back side
Back side
2
7
8
9
10
9.
Paper feed cover
Open this cover when releasing paper misfed in the
drawer feeding area.
10.
Paper Feed Cover (optional)
Open this cover when releasing paper misfed in the Paper
Feed Pedestal (optional) or Large Capacity Feeder
(optional).
11.
Paper size indicator
The size of the paper set in the drawer can be checked.
12.
Paper Feed Pedestal (optional, KD-1027) and
Additional Drawer Module (optional, MY-1035)
or Large Capacity Feeder (optional, KD-1028)
Use the Paper Feed Pedestal (optional) to add one drawer.
The Additional Drawer Module (optional) can be installed
in this device.
A maximum of 2500 sheets (80 g/m
plain paper can be placed in the Large Capacity Feeder
(optional).
13.
Drawer
A maximum of 550 sheets (80 g/m
sheets (105 g/m 2 or 28 lb. Bond) of plain paper can be
placed in one go.
P.16 "Placing paper" in this manual
14.
Front cover
Open this cover when you replace the toner cartridge and
clean the charger.
3
4
5
6
2
or 20 lb. Bond) of
2
or 20 lb. Bond) or 500