Chapter 2 BASIC OPERATION
Basic Copying Operation
The basic copying procedures, such as enlargement/reduction copying and duplex copying as well as bypass copying, are as
follows.
Making copies
Press the [COPY] button on the control panel.
Place the original(s).
P.17 "Placing originals" in this manual
Select the copy modes as required.
1
Key in the desired number of copies, and then
control panel. Copying starts.
22
You can switch the color mode. There are 3 color modes as
shown below.
FULL COLOR: All originals are copied in full color. (Default)
BLACK:
AUTO COLOR: The equipment automatically judges the
2
•
To stop copying, press the [STOP] button on the control
1
panel and then [MEMORY CLEAR] on the touch panel.
•
Printed paper exits to the exit tray of the equipment or the
Finisher (optional). The tray to which the paper exits is
indicated by the arrow on the touch panel.
2
All originals are copied in black and white.
type of each color on originals. Colored
originals are copied in full color and black-
and-white originals are copied in black and
white.
press the [START] button on the