Oki CX4545 MFP Safety Information Manual page 14

1.GENERAL PRECAUTIONS
 Do not damage, break or attempt to repair the power cord.
The following things should not be done to the power cord.
- Twisting it
- Bending it
- Pulling it
- Placing anything on it
- Heating
- Situating it near radiators or other heat sources
This could cause a fire or give you an electric shock. If the power cord is damaged, contact your service
representative.
 Do not install the equipment by yourself or try to move it once it has been installed. This could result in
an injury or damage to the device. Contact your service representative if the equipment needs to be
installed or moved.
 The socket outlet shall be near the equipment and be easily accessible.
 Pull out the plug from the outlet more than once a year to clean around the prongs. Accumulating dust
and dirt could cause a fire due to the heat released by electric leakage.
 When removing the plug from the outlet, do not pull the power cord. Always hold the plug when
removing it from the outlet. If the power cord is pulled, the wires may break and this could cause a fire or
give you an electric shock.
 Make sure that the ventilation holes are not blocked.
If the temperature within the Multifunctional Digital Systems becomes too high, a fire could result.
ES9460 MFP/ES9470 MFP/CX3535 MFP/CX4545 MFP
 The Paper Feed Pedestal (optional) has 4 antiskid devices and 2 fall-preventing stoppers on the bottom.
When moving this equipment, turn them in the direction of arrows (see figures below) and raise them to
unfix the equipment. After it has been moved, be sure to turn them in the opposite direction and lower
them to fix it.
12 General Precautions