When [Card Authentication] Is Enabled; When [Card Authentication + Password] Is Enabled - Konica Minolta bizhub C35 User Manual

If an authentication failure recurs, the problem may be due to incorrect
registration of IC card information. Register IC card information again.
When [Card Authentication] is specified for [Authentication Type], a regis-
tered user is authenticated by simply placing the IC card. When [Card
Authentication + Password] is specified, a registered user is authenticated
by placing the IC card and entering the password.
Press [User Name] and [Password] to log in by entering the user name
and the password, without using the authentication device.
IC card authentication cannot be performed while the machine is in Power
Save mode. After pressing the [Power Save] key to cancel Power Save
mode, place the IC card on the authentication device and complete the
authentication procedure.

When [Card Authentication] is enabled

1
Press [Card Authentication].
When using the ID & Print function with IC card authentication, select
[Begin Printing] or [Access Basic Screen] as necessary. For details on
the ID & Print function, refer to "ID & Print" on page 6-4.
2
Place the IC card on the authentication device.

When [Card Authentication + Password] is enabled

1
Press [Card Authentication].
When using the ID & Print function with IC card authentication, select
[Begin Printing] or [Access Basic Screen] as necessary. For details on
the ID & Print function, refer to "ID & Print" on page 6-4.
2
Place the IC card on the authentication device.
3
Press [Password] and enter the password.
4
Press [Login].
15-16 Logging in to this machine