Operator Messages - Konica Minolta bizhub C35 User Manual

Message
[The USB device is
invalid.]
[Disconnect USB device.]
[IEEE802.1x Auth. failed]
[Please reboot.]
[IEEE802.1x
Authenticating]
[Please wait.]

Operator messages

Message
[Configuration of Options
Changed]
[Configuration of Options
Changed]
[Power Off and ON.]
[Cover Open]
[Cover is open.]
[Close all covers properly.]
[Misfeed Detected]
[Misfeed was detected.]
[Remove the paper.]
[Imaging Unit Missing]
[Install imaging unit and
close all doors.]
Status, error and service messages
Cause
An incompatible USB
device is connected to
the USB HOST port.
IEEE 802.1X port
authentication timed
out.
IEEE 802.1X port
authentication is being
performed.
Cause
An optional lower
feeder unit was
installed or removed
while the machine is
on.
The cover is open.
A media misfeed
occurred.
No imaging unit is
installed. Otherwise,
an imaging unit
incompatible with the
machine has been
installed.
Solution
Disconnect the USB
device from the USB
HOST port.
Turn the machine off,
then on again.
If authentication is suc-
cessful, the message is
cleared.
If authentication times
out, turn the machine
off, then on again.
Solution
Turn the machine off,
wait a few seconds, and
then it on again.
Close the indicated
cover.
Open the indicated
cover, and remove the
misfed media.
Install the correct imag-
ing unit.
13-41