Epson WorkForce WF-3540 Instructions page 2

5
I nsert the cartridges in the holder for each color. Press
each cartridge down until it clicks.
6
C lose the cartridge cover. Press down until it clicks into
place. Then lower the scanner unit.
7
I nk priming begins. This takes about 5 minutes.
N ote: Your printer ships with full cartridges and part of the ink
from the first cartridges is used for priming the printer.
C aution: Don't turn off the printer while it is priming or you'll
waste ink.
5
Load paper
You can load letter-, A4-, or legal-size paper, as well as
envelopes, and various sizes of photo paper in cassette �. In various sizes of photo paper in cassette �. In
cassette 2, you can load only letter-, A4-, or legal-size plain
paper. For instructions on loading envelopes, photo paper,
or legal-size paper, or using the rear feed slot, see the online
User's Guide.
1
P ull out a paper cassette.
2
S queeze and slide out the edge guides.
3
I nsert the paper with the glossy or printable side
facedown.
photo paper in cassette �. In
N ote: Make sure the paper is loaded against the edge guide
and not sticking out from the end of the cassette.
4
S lide the edge guides against the paper, but not too
tight. Make sure the paper is under the tabs on the edge
guides.
5
G ently insert the paper cassette.
N ote: The paper may slide forward slightly as you insert the
cassette. This is normal.
6
E xtend the output tray and raise the stopper as shown.
6
Connect the fax line
To fax, connect the phone cord to a telephone wall jack and
to the LINE port on your product. To connect a telephone or
answering machine, use the EXT. port on your product. See
the Quick Guide for more details.
Note: If you're connecting to a DSL phone line, you must use a DSL
filter or you won't be able to fax. Contact your DSL provider for the
necessary filter.