Table of Contents
Advertisement
Antenna Installation
If your AIRAVE is ever unable to receive a GPS signal, it
may become necessary to improve the reception by
installing the GPS antenna. This section outlines the
installation of this external GPS antenna.
In very rare cases, you may find that because of its
current location, the base station's internal GPS
antenna may not be able to properly receive and
maintain an active GPS signal. If the GPS signal is not
detected, as indicated by the LED, connect the
included external GPS antenna.
Without a valid GPS signal, the base station will not
function. Any new calls will be redirected to the nearest
cell tower.
If the GPS signal is ever interrupted or insufficient
because of location, install the external GPS antenna
and place it in an open area for better reception.
WARNING:
Use only the included Sprint-approved GPS
antenna.
Note:
The GPS antenna receives signals from Global
Positioning System satellites and uses them to obtain
time and location information.
Connecting the GPS Antenna
When positioning the GPS antenna, ensure that it is:
Installed in a horizontal position.
WARNING:
Do not use duct tape to secure the GPS antenna
to its new location.
Adjacent to a closed window and in an open
area. This ensures a clear reception of the GPS
signal.
Note:
GPS signal strength can be greatly reduced in passing
through walls or other hard surfaces.
Antenna Installation
5
Advertisement
Table of Contents
