Table of Contents
Advertisement
5G mmWave Antenna Remove
The 5G mmWave antenna is only supplied with United States devices.
1
Check the screw on the right 5G mmWave antenna module and remove it using a
cross-head screwdriver.
Check the number of screws that have been removed and store them carefully to
make sure that no unassembled screws are left inside the device during assembly.
2
Insert the pointed end of your tweezers in the gap between the lower screw mount of
the right 5G mmWave antenna bracket and the frame.
Pry up on the bracket until you can grab it with the tweezers or your fingers.
Be careful not to damage the battery.
Do not use a connector or cable to pull out the module.
Disassembly and Assembly
85
Advertisement
Table of Contents
