Important Safety Information; General Precautions; Maintenance Notes - Samsung SPRINT SCS-26UC Important Information Manual

User manual
Table of Contents

Advertisement

Important Safety Information

General Precautions

There are several simple guidelines to operating your base
station properly and maintaining safe, satisfactory service.
Avoid exposing your base station to rain or liquid spills. If
your base station does get wet, immediately turn the power
off and remove the power connector.
Do not operate the base station in an extremely dusty or
humid environment.
Avoid placing the base station near radiators or other
heating sources.
Do not obstruct the heat vents by blocking the openings or
covering the base station, and do not operate it in a confined
space.
Avoid locating the base station where it could be exposed to
direct sunlight for prolonged periods.
Do not connect the base station to a power strip containing
an excessive number of other devices.
If the base station will not be used for a prolonged period,
remove the power cord from the AC outlet.
16
Important Safety Information
Although your base station is quite sturdy, it is a complex
piece of equipment and can be broken. Avoid dropping,
hitting, bending, or sitting on it.
Any changes or modifications to your base station not
expressly approved in this document could void your
warranty for this equipment and void your authority to
operate this equipment.
Note:
For the best care of your base station, ensure that only
authorized personnel service your device. Failure to do so may
be dangerous and void your warranty.

Maintenance Notes

These notes should be carefully reviewed before using the
base station:
Only connect the base station's power plug to a 110–125
VAC outlet.
When cleaning the AIRAVE, first unplug the connector from
the power outlet. Do not clean the base station using
chemical solvents or detergents, but with an anti-static
cleaning pad.
The AIRAVE should be placed at least 2 feet away from a Wi-
Fi router.
Do not obstruct the heat vents by blocking the openings or
covering the base station.
Remove the base station's power connector from the power
outlet if the base station will not be used for an extended
period.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sprint airave

Table of Contents