Table of Contents
Advertisement
5G mmWave Antenna Remove
The 5G mmWave antenna is only supplied with United States devices.
1
Insert the pointed end of your tweezers in the gap between the edge of the right 5G
mmWave antenna and the frame.
Pull the 5G mmWave antenna out of its recess until you can grab it with the tweezers
or your fingers.
Be careful not to damage the battery.
When removing the 5G mmWave antenna, be careful not to damage it.
•
Be careful not to damage the near components.
•
Do not use a connector or cable to pull out the module.
•
If the 5G mmWave antenna feels stuck, apply a microwaveable heating bag for
2 minutes to soften the adhesive. When reheating, it should be heated no longer
than 30 seconds.
Disassembly and Assembly
97
Advertisement
Table of Contents
