Samsung SPRINT SCS-26UC Important Information Manual page 10

Connecting the GPS Antenna to the Base
Station
1.
Rotate the antenna down to provide access to the
GPS antenna's protective cover (1).
2.
Press down on the antenna compartment cover
and slide it forward (2).
3. Use a blunt tool (such as a coin) to carefully
remove the antenna from the antenna
compartment (3).
4. Connect the antenna to the GPS antenna cable
end (see label on cable) (4 on next page).
5.
Connect the other end of the antenna cable to the
base station as shown (5 on next page).
WARNING:
Do not force the connector into the GPS antenna
port as this can damage the connector.
6.
Replace the antenna compartment cover. Make
sure the cable is threaded through the opening on
the cover.
6 Antenna Installation
WARNING:
The external GPS antenna should not be used
outdoors.
Tip:
You can use double-sided tape to secure the bottom of
the GPS antenna to its new location. Do not use duct
tape.