Allied Telesis Layer 3 Switches Network Manual page 11

Examples To allow the user "steve" full read, write and notify SNMP access to the switch:
To also give the user "jane" read and notify access to everything on the switch, add the
following commands:
To also give the user "paul" unauthenticated read access to everything on the switch except
BGP, add the following commands:
To also send traps securely to the PC with IP address 192.168.11.23 for user "steve" to see,
add the following commands:
For more information about the above examples, see How To Configure SNMPv3 On Allied
Telesis Routers and Managed Layer 3 Switches, available from
literature/howto.aspx. This How To Note also explains SNMPv3 concepts in detail, including
users, groups and views.
Create A Secure Network With Allied Telesis Managed Layer 3 Switches
enable snmp
add snmp view=full oid=1.3.6.1 type=include
add snmp group=super-users securitylevel=authPriv readview=full
writeview=full notifyview=full
add snmp user=steve group=super-users authprotocol=md5
authpassword=cottonsox privprotocol=des privpassword=woollytop
add snmp group=users securitylevel=authNoPriv readview=full
notifyview=full
add snmp user=jane group=users authprotocol=md5
authpassword=redjeans
add snmp view=restricted oid=1.3.6.1 type=include
# exclude bgp by specifying either mib=bgp or oid=1.3.6.1.2.1.15:
add snmp view=restricted mib=bgp type=exclude
add snmp group=restricted-users securitylevel=noAuthNoPriv
readview=restricted
add snmp user=paul group=restricted-users
add snmp targetparams=netmonpc securitylevel=authPriv user=steve
add snmp targetaddress=nms ip=192.168.11.23 udp=162
params=netmonpc
Managing the device securely
www.alliedtelesis.com/resources/
11