Configuring The Flexijack Connector - HP m9040n - Pavilion - Elite Media Center Getting Started Manual

Configuring the FlexiJack connector

Your audio device may have a FlexiJack connector that supports both microphone and Line
input. If so, you can change the FlexiJack mode if necessary. To do this, you must select the
function in the Creative Console Launcher after you connect the audio cable to the
FlexiJack connector on the sound card.
NOTE: If you are using the FlexiJack as your Digital In connection, and you want to
connect digital speakers as your output device, you need a special connector from
Creative.
1 Connect your audio cable to the FlexiJack connector on the sound card.
2 Click the Windows Start Button, All Programs, Creative, and then Creative
Console Launcher.
3 Click the Jacks button.
4 Under FlexiJack Mode, select either Digital I/O or Mic-In/Line-In.
5 Close the window.
Sound Blaster X-Fi configuration modes
The Sound Blaster X-Fi sound card includes three modes: Audio Creation Mode,
Entertainment Mode, and Game Mode.
The main functions, such as speaker configuration, equalizer, and volume control, are
available in all three modes. However, each mode optimizes the sound card resources to
provide the best audio performance for different activities.
Audio Creation Mode
Optimizes the sound card for advanced recording functions.
Available features:
Recording from several audio sources
Applying studio-quality effects
Mixer settings
Equalizer settings
Getting Started Updated Information
35