Apm - Asus E2KM1I-DELUXE User Manual

The following two items appear only when you set the HD Audio Device item to [Enabled].
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or high-
definition audio depending on the audio standard that the front panel audio module supports.
[HD]
[AC97]
SPDIF Out Type [SPDIF]
Allows you to select the digital audio output type. Configuartion options: [SPIDF] [HDMI]
Realtek LAN Controller [Enabled]
[Enabled]
[Disabled]
Realtek PXE OPROM [Disabled]
This item appears only when you set the previous item to [Enabled] and allows you to
enable or disable the PXE OptionRom of the Realtek LAN controller. Configuration options:
[Enabled] [Disabled]
Asmedia USB 3.0 Controller [Enabled]
[Enabled]
[Disabled]
Asmedia USB 3.0 Battery Charging Support [Disabled]
This item appears only when the Asmedia USB 3.0 Controller item is set to [Enabled].
[Enabled]
[Disabled]
Wi-Fi Controller [Enabled]
[Enabled]
[Disabled]
Bluetooth Controller [Enabled]
[Enabled]
[Disabled]
2.5.6

APM

EuP Ready [Enabled]
[Disabled]
[Enabled]
2-18
Sets the front panel audio connector (AAFP) mode to high definition audio.
Sets the front panel audio connector (AAFP) mode to legacy AC'97
Enables the Realtek LAN controller.
Disables the controller.
Enables the onboard USB 3.0 controller.
Disables the controller.
Enables the Asmedia USB 3.0 battery charging function.
Disables this function.
Enables the Wi-Fi controller.
Disables the controller.
Enables the Bluetooth controller.
Disables the controller.
Disables the Energy Using Products (EuP) Ready function.
Allows BIOS to switch off some power at S5 state to get the system ready
for the EuP requirement. When set to [Enabled], all other PME options will
be switched off.
Chapter 2: Getting started