Asus E2KM1I-DELUXE User Manual page 31

4. Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1~5)
These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA hard disk
drives and optical disc drives.
E2KM1I-DELUXE SATA 6.0Gb/s connectors
• These connectors are set to AHCI mode by default. To configure the SATA type in
BIOS, click Advanced Mode > Advanced tab > SATA Configuration > OnChip
SATA Type. See section 2.5.2 SATA Configuration for details.
• You must install Windows
hard disk drives.
• When using hot-plug and NCQ, set the type of the SATA connectors in the BIOS to
[AHCI]. See section 2.5.2 SATA Configuration for details.
5. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either High Definition Audio or AC`97 audio standard. Connect one end of the front
panel audio I/O module cable to this connector.
E2KM1I-DELUXE Front panel audio connector
• We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard high-definition audio capability.
• If you want to connect a high definition front panel audio module to this connector, set
the Front Panel Type item in the BIOS to [HD]. See section 2.5.5 Onboard Devices
Configuration for details.
• The front panel audio I/O module is purchased separately.
ASUS E2KM1I-DELUXE
XP Service Pack 3 or later version before using Serial ATA
®
PORT1 L AGND
PORT1 R NC
PORT2 R SENSE1_RETUR
SENSE_SEND
PORT2 L SENSE2_RETUR
HD-audio-compliant
pin definition
AAFP
PIN 1
MIC2 AGND
MICPWR NC
Line out_R NC
NC
Line out_L NC
Legacy AC'97
compliant definition
1-19