Speaker Connector; System Panel Connector - Asus E2KM1I-DELUXE User Manual

6. System panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
E2KM1I-DELUXE System panel connector
• System power LED (2-pin PWRLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin +HDLED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The HD LED lights up or flashes when data is read from or written to
the HDD.
• ATX power button/soft-off button (2-pin PWRBTN)
This 2-pin connector is for the system power button.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
7. Speaker connector (4-pin SPEAKER)
The 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
E2KM1I-DELUXE Speaker out connector
1-20
F_PANEL
GND
PWR
PLED-
PLED+
PIN 1
SPEAKER
Speaker Out
GND
GND
+5V
PIN 1
Reset
Ground
HD_LED-
HD_LED+
Chapter 1: Product introduction