Factory Reset - D-Link DSL-302G - 8 Mbps DSL Modem Manual

The Advanced ADSL Information menu lists information about errors, signal characteristics and loop distance.
The data provided in the Advanced ADSL Information window includes:
♦ Re_training – number of attempts to establish the ADSL connection
♦ CRC – Cyclic Redundancy Checking, number of CRC errors since ADSL connection
established
♦ FEC – Forward Error Correction, number of FEC errors since ADSL connection established
♦ HEC – Header Error Checking, number of HEC errors since ADSL connection established
♦ Line Attenuation – measured in dB
♦ Noise Margin – measured in dB
♦ Output Power – measured in dBm
The Carrier Information menu displays the frequency distribution of the upstream and
downstream bandwidth. The upstream portion occupies the lower frequency block.

Factory Reset

The Modem can be reset to the factory default settings using the reset button located on the rear
panel. To reset the Modem, gently depress the reset button with a paper clip while the unit is powered
on.
13