D-Link DSL-200 - 8 Mbps DSL Modem User Manual page 20

7. In the same window, select the appropriate Encapsulation method from the
drop-down menu. You will select the encapsulation setting that is appropriate for
the driver you are installing.
Note: At this point you must choose the Encapsulation method and Modulation
technique used for your ADSL connection. Be sure to have the correct
information available. Refer to the Settings Table if you have it completed.
§
For RFC 2516 PPPoE, select RFC 2516 PPPoE Encapsulation.
§
If you using RFC 2364 PPPoATM and your service provider has not specified an
encapsulation setting, use RFC 2364 PPPoATM NULL Encapsulation.
If you are using the LAN driver, select the appropriate RFC 2684 encapsulation setting. If
your service provider has not specified an encapsulation setting, use RFC 2684 IPoATM
Bridged LLC Encapsulation.
8. Again in the same window, select the proper Modulation settings using the drop-
down menu. Your service provider will give you the appropriate Modulation
settings. Choose T1.413, Multimode, G.Lite or G.DMT. If your service provider
has not specified a modulation setting, use Multimode. Click Next to continue.