Table of Contents
Advertisement
4
The DSL-200 can be used with the following operating systems:
Microsoft Windows 98
Microsoft Windows 98 Second Edition
Microsoft Windows 2000
Microsoft Windows Millennium Edition
Microsoft Windows XP
The procedures for each system are slightly different so be sure to follow the instructions
provided for your PC's operating system.
The Microsoft Plug and Play feature will automatically detect the modem after it has been
installed. A new window will appear for each step of the installation.
Once you have the driver installed and the Modem is connected, you should verify that the
ADSL service is working.
If you wish uninstall the Modem see Appendix B for instructions.
What Driver to Install
You will need to select one driver (see Step 5) to operate the Modem. Which driver you use
will depend on the particular protocol used to provide your ADSL service. Ask your DSL
service provider to assist you in selecting either the WAN or LAN driver to operate the
Modem. Only one driver should be installed.
For PPP connections, install the WAN driver. RFC 2364, PPP over ATM, and RFC 2516, PPP
over Ethernet installations must use the WAN driver.
If the protocol used for your ADSL service is defined by RFC 2684, Multiprotocol
Encapsulation over ATM Adaptation Layer 5 (Bridged Ethernet), then you will need to install
the LAN driver.
S
OFTWARE
I
NSTALLATION
3
Advertisement
Table of Contents
Need help?
Do you have a question about the DSL-200 - 8 Mbps DSL Modem and is the answer not in the manual?
Questions and answers