Xerox 6100BD - Phaser Color Laser Printer Getting Started Manual page 25

21
Caveat
Configuration backup to CD fails if more than
one CD is needed.
) Select a backup destination other than CD
1
2) Select fewer categories to backup so that
the backup fits on one CD.
This step can be repeated as many times as
needed to get all of the categories backed up.
If multiple backups are performed, then
multiple restores will be needed to restore the
entire configuration.
The Apply button does not apply changes in
the International tab.
Press [OK] to apply changes.
The Remote UI preference setting is not
persistent after an upgrade.
Recovery: reset the preferences for the
Remote UI.
The Online Gateway may log a misleading
message stating that there is a JDL/JDE
problem when SYS files are missing. When
compiling or adding JSLs to a library, do not
delete the files first.
System prompts are unclear and a misleading
error message is produced when user-defined
security profiles contain a character space. To
avoid this, do not use character spaces in the
name(s) of the security profile(s).
Restarts following a configuration restore may
cause the printer to power on. To avoid this,
prior to performing the configuration backup.
This will set the backed-up IOT state to Off.
When configuration restore is performed, the
IOT state will be restored, and thus will not be
automatically powered on.
Applicable printer product
DocuPrint 1xx EPS
DocuTech 61xx
DocuPrint 1xx EPS
DocuTech 61xx
DocuPrint 1xx EPS
DocuTech 61xx
All monochrome printers
All monochrome printers
All monochrome printers