Removal and
Replacement
Procedures (RRPs)
This section contains the removal and replacement procedures for spared parts in the
printer. In most cases, to reinstall a part, simply reverse the Removal Procedure shown.
Locations given in the Removal and Replacement Procedures are always referenced from
the front of the printer as you are facing the control panel.
The following notations apply:
Arrows in the illustration show direction of movement.
I
The number at the bottom of the illustration is used by developers for tracking
I
and control purposes and has no bearing on part numbers.
Before you begin any Removal and Replacement Procedure:
Always verify proper printer operation after removing or
replacing parts of the printer.
Removal and Replacement Procedures
37