Fru Disassembly - Removal And Replacement Procedures - Xerox PHASER 6200 Service Manual

FRU Disassembly - Removal
and Replacement
Procedures
This section contains the removal and replacement procedures for selected parts of
the printer according to the Field Replaceable Units (FRUs) Parts List. Not all
Replacement Procedures are included in this Service Manual. In most cases, to
reinstall a part, simply reverse the Removal Procedure shown. In some instances, the
Replacement Procedure is included, because it may contain special steps. For specific
assemblies and parts, refer to the "FRU Parts List' on page 253.
Contents
RRP Part Name
RRP 1 - Covers - Print Engine
RRP 1.1 - Front Cover (PL 1.1.2)
RRP 1.2 - Front Panel (PL 1.1.1)
RRP 1.3 - Fuser Fan (PL 1.1.7)
RRP 1.4 - Top Main Cover (PL1.1.9)
RRP 1.5 - Image Unit Top Cover (Door C) (PL1.1.10)
RRP 1.6 - Right Side Cover (PL1.1.24) and Left Side Cover (PL1.1.30)
RRP 1.7 - Rear Cover (PL 1.1.20)
RRP 1.8 - Left and Right Links (PL 1.1.23)
RRP 1.9 - Multi-Purpose Tray (MPT) (PL1.1.99)
RRP 1.10 - Front Right Cover (PL 1.1.25)
RRP 1.11 - Front Left Cover Assembly (PL1.1.29)
RRP 2 - Universal Paper Tray I
RRP 2.1 - Paper Feed Roller (PL 2.1.1) (CRC as Kit)
RRP 3 - Paper Feed I
RRP 3.1 - Turn Chute Assembly (PL3.1.2)
RRP 3.2 - Printer Chassis
RRP 3.3 - Paper Pick Assembly (PL3.3.1)
RRP 3.4 - Right and Left Housing (PL 3.2)
RRP 3.5 - Temperature/Humidity Harness (PL3.2.1) and Sensor (PL3.2.2)
RRP 3.6 - High-Capacity Feeder Harness (PL3.2.3)

FRU Disassembly - Removal and Replacement Procedures

RRP
Page
125
127
128
130
131
132
133
134
135
136
138
140
141
142
144
146
147
148
119