Activating/Deactivating The Acoustic Signal - AEG FAVORIT 65050 VI User Instructions

Activating/deactivating the acoustic signal

The acoustic signal can indicate acoustically:
– at which water hardness the water softener is set.
– when a programme has finished.
– when an error has occurred with the dishwasher.
You can switch on/off the acoustic signal in the following way:
1. Press the ON/OFF button.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.
If the only LED indicator illuminated is one that belongs to a pro-
3
gramme button, this means that this programme has been activated.
The programme must be cancelled (RESET):
Press function buttons 2 and 3 simultaneously for approx. 1 second.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.
2. Press function buttons 2 and 3 simultaneously and keep them pressed.
The LED indicators for function buttons 1 to 3 will flash.
3. Press function button 3.
The multi-display will indicate the current setting:
0 b
1 b
4. Pressing function button 3 will change the setting.
5. Once the multi-display is indicating the required setting, press the
ON/OFF button. The setting is now saved.
Acoustic signal deactivated
Acoustic signal activated (ex-factory setting)
Operating Instructions
17