Adding Special Salt - AEG FAVORIT 65050 VI User Instructions

1. Set the water softener manually and electronically to the desired water
0
hardness:
Manual
setting
0
0 - 1
If the water softener is electronically set at "1" for the purpose of using
3
detergent that includes special salt, the special salt indicator is deacti-
vated.

Adding special salt

If you are using dishwasher detergent and special salt separately, add
the special salt:
– Before using the dishwasher for the first time.
– When the indicator for special salt
panel.
0 1. Open the door, remove the lower
basket.
2. Undo the lid on the salt container by
turning it anticlockwise.
3. When using for the first time:
fill the salt container with water.
4. Place the funnel supplied on the con-
tainer opening.
Fill the container with salt through
the funnel; the capacity of the con-
tainer is approx. 1.0-1.5 kg depend-
ing on the grain size. Do not overfill
the salt container with salt.
The water expelled by filling the salt container with salt runs out of the
3
salt container onto the base of the washing compartment. This is not a
cause for concern, the water will be pumped out at the start of the
next wash programme.
5. Clean any salt remnants on the container opening.
Electronic Multi-display
setting indicator
1
2l to 10l
2-10
Operating Instructions
Addition of special salt
IL
Do not add special salt.
Addition of special salt
via salt container
(factory setting)
is illuminated on the control
J
13