Panasonic CF-29CRKGZKM - Toughbook 29 - Pentium M 1.2 GHz Service Manual page 50

n Attaching the Memory Heat Plate
7.2.14. Setting the Speaker
1. Set the MP Eject Slide Ass'y to the Bottom Cover.
2. Fix the MP Eject BOUSUI Plate using the Screw<P>.
3. Fix the MP Eject Lever using the four Screws<O>.
4. Fix the Heat Pipe Unit Bottom using the two Screws<N>.
5. Fix the three Speaker Angles to the Speaker using the
three Adhesive Tapes.
6. Attach the Speaker Spacer to the Speaker.
7. Attach the CPU Heatsink Rubber and the LAN Heat Plate
Spacer to the LAN Heat Plate.
8. Fix the Speaker and the LAN Heat Plate using the four
Screws<M>.
9. Attach the Radiation Rubber, Coil Cooling Sheet and the
LCD Lamp Sheet to the LAN Heat Plate.
Screws <M>: DXQT26+D4NLT
Screws <N>: DXYN+J6FNL
Screws <O>: DXYN26+F5NLT
Screw <P>: DXQT26+D4NLT
Memory Heat Plate
IC
0~1mm
Heat Pipe Unit
Bottom
MP Eject
Lever
MP Eject Slide Ass'y
DIMM Stopper
Sheet
7-32
0~1mm
LCD Lamp Sheet
Coil Cooling Sheet
LAN Heat
<N>
Plate
<N>
CPU Heatsink
Rubber
LAN Heat
Plate Spacer
MP Eject
BOUSUI
<O>
Plate
<O>
<O>
<O>
MP Eject
Spring
<P>
Speaker
Bottom Cover
Radiation
Rubber
<M>
<M>
<M>
<M>
Speaker
Angle
Adhesive
Tape
Speaker
Spacer