Panasonic CF-29CRKGZKM - Toughbook 29 - Pentium M 1.2 GHz Service Manual page 43

7.2.11. Setting the Main PCB, EXT Antenna PCB, PCMCIA Unit and RTC Battery
1. Connect the Cable the Connector (CN4) on the Main
PCB, and Attach the RTC Battery.
2. Fix the PCMCIA to the Main PCB using the Screws<T-2>.
No1 to No4
3. Connect the six Cables to the six Connectors.
(Main PCB: CN6, CN9, CN10, CN51, CN54)
(EXT Antenna PCB: CN1)
4. Fix the Main PCB using the three Screws<V>. No5 to
No7
5. Fix the Main PCB using the two Screws<T-1>. No8, No9
6. Fix the Main PCB using the two Screws<S>. No10, No11
7. Fix the Main PCB using the Screw<W>. No12
8. Fix the Main PCB using the two Screw<X>. No13, No14
9. Fix the EXT Antenna PCB using the two Screws<U>.
No15, No16
Note:
Tighten the Screws in the numbered order (No1 to No16).
Screws <S>: DFHM5054XA
Screws <T-1>:DFHE5025XA
Screws <T-2>:DFHE5025XA
Screws <U>: DRQT2+G6FKL
Screws <V>: DRHM5104ZA
Screw <W>: DFHE5025ZA
Screw <X>: DRHM5117ZA
<T-2>
:No4
<S>
:No11
Connector CN51
(front side)
<T-2>
:No3
Main PCB
<T-2>
Connector CN54
(reverse side)
Connector CN4
(reverse side)
PCMCIA Unit
to Connector
(CN4)
RTC Battery
to Connector
(CN950)
to Connector
(CN51)
<X>
:No13
<X>
:No14
to Connector
(CN54)
7-25
EXT Antenna PCB
<T-2>
Connector
:No1
CN1
Connector CN6
<S>
<T-1>
(reverse side)
:No10
:No9
Connector CN9
(reverse side)
:No2
<T-1>
<W>
:No8
:No12
Connector CN10
(front side)
Connector CN1
(reverse side)
to Connector
(EXT Antenna CN1)
to Connector
<U>
(CN9)
to Connector
:No16 <U>
(CN6)
to Connector
(CN10)
to Connector
(Main PCB CN1)
:No15
<V>
:No7
<V>
:No5
<V>
:No6