Panasonic CF-29CRKGZKM - Toughbook 29 - Pentium M 1.2 GHz Service Manual page 33

n Attaching the Inverter PCB and TS PCB
1. Attach the Inverter PCB to the LCD Back Holder of the LCD Unit and connect the two Cables to the two Connectors on the
Inverter PCB.
2. Attach the TS PCB to the LCD Back Holder of the LCD Unit and connect the two Cables to the two Connectors on TS PCB.
Safety Working
LCD Plate R
Shape the Lamp Cable straighten
so that the Lamp Cable is not covered
on the LCD Plate R or the LCD Back
Damper Ass'y.
LCD Back
Damper Ass'y
View "A"
Inverter LCD Inverter
PCB Case Spacer L
Lamp Cable
TS PCB
Connectors
0~2mm
Tape
Tape
View "B"
View "C"
View "A"
Tape
LCD Inverter
Case Spacer L
LCD Conductive
Sheet
View "B"
LCD Plate R
Connector
0~2mm
Tape
Connector
Terminal side is up.
Connectors
Inverter PCB
LCD Cable Tape
View "D"
View "C"
Cable is up on
Lamp Cable
0~5mm
Lamp
Cable
7-15
LCD Cable
LCD Back Holder
View "D"
LCD Conductive Sheet
or LCD Cable Tape
Cables