Panasonic CF-29CRKGZKM - Toughbook 29 - Pentium M 1.2 GHz Service Manual page 45

n Setting the Main PCB
1. Set the Main PCB to the Top Cabinet in order.
Confirm that the Pin of the Top
Cabinet of the hole of the Main PCB.
Safety Working
Pass the Power SW Cable through
the upper side of Cable.
Power SW Cable
Cable
Safety Working
Main PCB
View "C"
2
View "B"
Confirm that the Boss of the Top Cabinet of
the hole of the Batt HDD CN Angle.
LAN Cable
Clamper
Slot
Confirm that the tying point of the
LAN Cable's Clamper is in the
opposite direction to Main PCB.
Safety Working
Pull out the LAN Cable Tip of the Screw
Confirm that the Pin of
the Top Cabinet of the
hole of the Main PCB.
1
View "A"
View "C"
Clamper
Tying point
7-27
View "A"
Main PCB
Tip of the Screw
Hole MP CN Spacer Hole
View "B"
Batt HDD CN Angle
Cable
Slot
Pass the LAN Cable
through this Slot.
LAN Cable