Panasonic CF-29CRKGZKM - Toughbook 29 - Pentium M 1.2 GHz Service Manual page 46

n Arranging the Cables and attaching the Sheets, the Tape, the Space PWB Hold MP and the Insulation Sheet
1. Connect the five Cables to the five Connectors.
(Main PCB: CN6, CN9, CN10, CN51, CN54)
2. Attach the three Sheets, the Tape, the Space PWB Hold MP and the Insulation Sheet.
Connect the Connector CN51.
Connect the Connector CN54.
Sheet
View "B"
View "C"
View "D"
1~2mm
IC
Tape
0.5~1.5mm
Attach the Sheet in condition that
the IO FPC is slid to the side of
the Connector CN10.
View "A"
View "D"
Tape
Space PWB
Sheet
Hold MP
Insulation Sheet
0~1mm
Space PWB
Hold MP
Insulation Sheet
0~0.5mm
Sheet
IO FPC
Safety Working
Connect the
Connector CN10.
View "C"
TP PCB
Sheet
Cable 0~1mm
1~2mm
0~1mm
Connect the Connector CN9.
Connect the Connector CN6.
7-28
View "A"
Wireless Module Holder
Do not put up the Cable
on the Wireless Module
Holder.
Cable
Pass the Cable through
the right side of the
Connector not to put up it
on the Connector.
Connector CN51
View "B"
Power SW Cable
CON Spacer
Cable
0~1mm
Sheet
0~1mm
3~4mm