Xerox C8 - DocuPrint Color Inkjet Printer Manual page 39

Do c u Co lo r 80 0 0/ 70 0 0 S y s te m A dm i n is t r a ti o n G u id e
6. In the Decurler E Table Settings Type E window:
a. Enter the following values in the fields by pressing the
arrow buttons:
– Since your job does not require the Downward
Decurler, enter 0% in each of the Lower fields.
– In the 2 mm Upper field enter 15%. As a result, any
pages with toner area coverage of 0% to 15% will be
sent through this Decurler. Since this job contains toner
area coverage between 11% and 12%, this is the
Decurler that will be used.
– In the 6 mm Upper field, enter 100%. Since your job
does not contain any pages with toner area coverage
between 16% and 100%, this Decurler will not be used
on this job.
– In the 10 mm Upward field, enter 100%. As a result,
this Decurler will not be used on this job.
NOTE: Remember, all fields have to be considered (Lower and
Upper) when entering Decurler values.
The following screen shows how the values would be entered:
b. To save your Decurler E Table Setting, press Close. The
Decurler E Table Setting Type E window closes and the
Decurler E Table Setting window opens.
1. De c u r l er A dj u s tm en t
1-35