Figure 3.12: Cable Selection Window; Figure 3.13: Cable Version Window - IBM 09N4290 User Manual

3. Click the Cable button to view the version information for the cable hardware. The Cable
Selection window opens.

Figure 3.12: Cable Selection Window

4. Select a switch cable to view and click the Version button. The Cable Version window opens.
Note that the switch cables are not upgradeable and the version information is displayed for
technical support purposes only.
5. Click X to close the Cable Version window.

Figure 3.13: Cable Version Window

NOTE: You can use the Reset button to reset the PS/2 switch cable. This activity is only relevant when the
console switch system involves a PS/2 switch cable attached to a tiered switch. On these occasions, you might
need to reset the PS/2 switch cable when the tiered switch is not recognized. If a reset is performed when a
console switch is connected directly to a server and not a tiered switch, the mouse/keyboard might fail to
respond. When this occurs, the target server requires a restart.
Chapter 3: Basic Operations 31