Figure 3.14: Scan Window - IBM 09N4290 User Manual

Figure 3.14: Scan Window

3. The Scan window contains a listing of all servers attached to the console switch. Click the check
box next to the servers you want to scan.
-or-
Double-click on the name or port of a server.
-or-
Press Alt and the number of the server you want to scan. You can select up to 16 servers from the
entire list.
4. In the Scan Time field, type the number of seconds (from 3 to 255) of time before the scan
moves to the next server in the sequence.
5. Click OK.
Removing a server from the scan list
1. In the Scan window, clear the check box next to the server to be removed.
-or-
Double-click on the name or port of the server.
-or-
Click the Clear button to remove all servers from the scan list.
2. Click OK .
Setting the scan duration
Type a value in the Scan Time field. The duration you type must be a minimum of 3 seconds and a
maximum of 255 seconds.
Starting the scan mode
1. If the OSCAR interface is not open, press Print Screen
2. Click Commands. The Commands window opens.
Chapter 3: Basic Operations
. The Main window opens.
33