Ip Interface; Show Vlan Name String; Create A Vlan Entry; Interface Vlan Vlan-Id - Asus GX2024B - GigaX Switch User Manual

GigaX2024B L2 Managed Switch User Manual
5.3.5

IP interface

5.3.5.1

show vlan name string

Use the show vlan user EXEC command to display the parameters for all
configured VLANs or one VLAN (if the VLAN ID or name is specified) on the
switch.
CLI Syntax: show vlan name string
Example: ASUS# show vlan name VLAN1
Note
5.3.5.2

Create a vlan entry

Use the vlan vid command to create vlan entry on the switch. Use the name
string command to create vlan entry with string on the switch.
CLI Syntax: vlan id
Example: (config)# vlan 3
5.3.5.3

interface vlan VLAN-ID

This command changes the operation to vlan interface command mode.
CLI Syntax: interface vlan VLAN-ID
Example: interface vlan 1
5.3.5.4

ip address

This command sets the ip address for indicated interface.
CLI Syntax: ip address A.B.C.D/M
Example: (config-if)# ip address 192.168.20.121/24
Note
62
The vlan1 is for system purpose, for example, for firmware
upgrade, management, and so on.
(config-vlan)# name vlan3
The interface name does not show up during configuration.
Please keep in mind what you are configuring.