5.3.9
Mirroring
5.3.9.1
Mirror setting
This command mirrors the source interface list traffic to the destination interface.
The mirror type support received traffic, Transmitted traffic, or both.
CLI Syntax: mirror session 1 source IFLIST (both/ rx/ tx)
mirror session 1 destination IFNAME
Example: (config)# mirror session 1 source fa1/0/1-4 both
(config)# mirror session 1 destination fa1/0/5
5.3.9.2
Show mirror
To show current mirror features.
CLI Syntax: Show mirror session
Example: ASUS# show mirror session
5.3.9.3
No mirror
This command disable the mirror function.
CLI Syntax: no mirror session 1
Example: (config)# no mirror session 1
5.3.9.4
No mirror
This command resets the source interfacesʼ received or transmitted traffic or
both the destination interface.
CLI Syntax: no mirror session 1 source IFLIST
Example: (config)# no mirror session 1 source fa1/01/-2
5.3.10
Static Multicast
5.3.10.1
mac-address-table multicast
Use the mac-address-table multicast configuration command on the switch to
add multicast static addresses to the MAC address table.
CLI Syntax: mac-address-table multicast MACADDR VLANID IFLIST
Example: (config)# mac-address-table multicast 0100.5e11.1111 2 fa1/01-3
GigaX2024B L2 Managed Switch User Manual
65