Modifying Vlans; Defining Vlan Membership; Sample Vlan Configurations - 3Com 3C16476BS-US - Baseline 2250 Plus Switch User Manual

34 C 4: C
HAPTER ONFIGURING THE

Modifying VLANs

Use the Modify VLAN screen to change the VLAN to
which a port belongs, and configure the port to com-
municate with all other VLANs, or a selected VLAN.
Figure 16 Modify VLANs Screen
Port – Displays the port number
■
Mode – The mode option determines if the port
■
can communicate with all VLANs, or only with a
selected VLAN
Uplink – If you select this, the port is able to com-
■
municate with all VLANs on the Switch
S
WITCH
Desktop - If you select this, the port can only com-
■
municate with other ports assigned to the VLAN
selected in the VLAN ID drop-down list.
An uplink port is sometimes referred to as a tagged
port. The two terms refer to the same feature.
VLAN ID – Enter the ID of the configured VLAN to
■
which you want this port to belong

Defining VLAN Membership

Use the Membership screen to configure port mem-
bers for the selected VLAN.
Figure 17 Membership Screen
VLAN ID – ID of the configured VLAN (1-4094, no
■
leading zeroes)
Name – Name of the VLAN (1 to 32 characters)
■
Ports – Port identifier
■

Sample VLAN Configurations

To illustrate how you can segment network devices
that are connected to the Switch, the following
sample configurations are provided.