GE NX-148E - Security NetworX LCD Keypad User Manual page 28

DISPLAY
Cancel
Gnd Flt
Man Test
Re-exit
Output Trip
Data Lost
Walk-test
End Test
Cross-Trip
Expansion
Event
Partial Arm
Listen In
Service Start Service Start
Service End
Code Entry
First Open
Last Close
Sprnklr
Clock Set
RF Jammed
CleanMe
26
Cancel
Ground Fault
Manual Test
Re-Exit
Output Trip
Data Lost
Walk-Test
End Test
Cross Trip
Expansion
Event
Partial Arm
Listen In
Service End
Code Entry
First Open
Last Close
Sprinkler
Clock Set
RF Jammed
CleanMe
DESCRIPTION
System is disarmed and the Cancel button was
pressed within 5 minutes of an alarm.
A short to ground has been detected.
Bell and/or communicator test while system is in
disarmed condition.
The exit delay has been re-started without
disarming the system.
A trip has occurred on an expander auxiliary
output.
Communication of a signal has failed (log only
event).
A zone "Walk-Test" mode has been activated.
Test has been ended.
The first zone of a cross zone has been tripped
(log only).
An expansion module created an undefined
event.
Reports a closing in the stay mode.
A listen in function has been activated.
Technician is on site.
Technician is off site.
A code has been entered.
Reports when the first partition is disarmed.
Reports when the last partition is armed.
Instant sprinkler supervisory report
Clock has been reset.
A wireless expansion module is jammed
A smoke detector requires cleaning.
NX-148E-CF