Changing User Codes; Assigning User Code Authority Levels - GE NX-148E - Security NetworX LCD Keypad User Manual

Networx series commercial fire lcd keypad
Hide thumbs Also See for NX-148E - Security NetworX LCD Keypad:
Table of Contents

Advertisement

CHANGING USER CODES

Press r
Step 1
Step 2
Enter [master code]. The LCD Screen will prompt for a user number.
NOTE: For partitioned systems, if you are changing the code of
another person, you must have access to all partitions, or at least
all of the partitions to which the other person has access.
Step 3
Enter the 2-digit user number.
necessary, i.e. "04" for user number 4.
The LCD keypad will display the current code for this user. Stars (r)
represent blanks. NOTE: To delete a user code, press [r]-[r]-[r]-[r]
for a 4-digit code or [r]-[r]-[r]-[r]-[r]-[r] for a 6-digit code.
Step 4
Enter the new user code for that individual. If you are changing the
current code, you may use the up and down scroll keys to select the digit
to change and enter the correct number. If it rejects the code because of
duplication or such, the sounder will beep 3 times.
Step 5
If another user code needs to be programmed, return to step 3 and enter
the user code.
Step 6
Press
Code Programming,

ASSIGNING USER CODE AUTHORITY LEVELS

Assign authority levels to users by following the steps below. Assign user codes
before assigning authority levels.
NOTE: You must have authority to the partition you wish to add or remove
from another person's authority.
Press r
Step 1
Step 2
Enter [master code]. The LCD Screen will prompt for a user number.
Step 3
Enter the 2-digit user number.
necessary, i.e. "04" for user number 4. The LCD will now prompt you for
the attributes in the following chart.
NX148E-CF
5 . The LCD Screen will prompt for a code.
#
while the LCD screen is prompting for a new user to exit
6 . The LCD Screen will now prompt for a code.
Always use leading zeros when
Always use leading zeros when
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents