Rs-232 Connection; Figure 4 - Mbb100 Rear Panel Connections; Figure 5 - Mbb100 Front Panel - Maretron MBB100 User Manual

® ®

Figure 4 - MBB100 Rear Panel Connections

The I/O interface panel located on the front of the MBB100 (see Figure 5) has two USB 2.0 interface
connectors.
Figure 5 – MBB100 Front Panel

2.4.1 RS-232 Connection

There is one external RS-232 connector. The RS-232 connector enables connection to an external
touch screen. To connect a serial cable with the RS-232 connector, please follow the instructions
below.
Step 1: Locate the RS-232 connector on the rear panel of the MBB100.
Step 2: Align the RS-232 connector on the serial cable with the RS-232 connector on the rear panel
of the MBB100.
Revision 1.0 Page 5