Table of Contents
Advertisement
MBB100 User's Manual
5 Troubleshooting
If you notice unexpected operation of the Maretron MBB100, follow the troubleshooting
procedures in this section to remedy simple problems.
Symptom
No activity on the display
Other Issues
If these steps do not solve your problem, please contact Maretron Technical Support (refer to Section
0 for contact information).
Warning: There are no user-serviceable components inside the Maretron MBB100. Opening the
MBB100 will expose the sensitive electronic components to adverse environmental conditions that
may render the unit inoperative. Please do not open the MBB100, as this will automatically void the
warranty. If service is required, please return the unit to an authorized Maretron service location.
Page 16
Troubleshooting Procedure
Check the connection to the power and network
connectors and tighten if necessary
Ensure that power is supplied to the connected
power cable.
Check the connection to the power jack located on
the rear of the device.
Press the power switch located on the front of the
device on the right-hand side.
Please refer to the Troubleshooting section of the
®
N2KView
User's Manual.
Revision 1.0
Advertisement
Table of Contents
