Table of Contents
Advertisement
MBB100 User's Manual
Of course you get the same flexibility using Maretron's N2KView
would running the software on a PC, which includes the ability to configure as many screens as you
want with exactly the information you want to see. Plus you get free upgrades to the software as
improvements and new features are added.
The Maretron MBB100 is designed to operate within the harsh demands of the marine environment.
However, no piece of marine electronic equipment can function properly unless installed, configured,
and maintained in the correct manner. Please read carefully and follow these instructions for
installation, configuration, and usage of the Maretron MBB100 in order to ensure optimal
performance.
1.2
Firmware Revision
This manual corresponds to the MBB100 running N2KView
1.3
MBB100 Features
The Maretron MBB100 has the following features.
• Full version of N2KView
separately)
• Wired Ethernet interface
• Supports user-supplied VGA monitor
• Supports user-supplied touchscreen (ELO, 3M Microtouch, Hampshire TSharc, Penmount)
• Supports user-supplied mouse and keyboard
• Supports Bluetooth mice and keyboards with built-in Bluetooth adapter
• Operates on 9-36VDC
• 20W power consumption
• Solid State Disk Drive
• Fanless cooling system
1.4
Quick Install
Installing the Maretron MBB100 display involves the following four steps. Please refer to the individual
sections for additional details.
• Unpacking the Box (Section 2.1)
• Choosing a Mounting Location (Section 2.2)
• Mounting the MBB100 (Section 2.3)
• Connecting the MBB100 (Section 2.4)
• Configuring the MBB100 (Section 2.5)
Page 2
®
software preinstalled (requires N2KView
®
software from the MBB100 as you
®
Version 3.2.
®
licenses, purchased
Revision 1.0
Advertisement
Table of Contents
