Replacing The Staple Cartridge (Saddle Stitcher Sd-509) - Muratec MFX-C2828 Quick Manual
Copy/print/fax/scan/box operations
Hide thumbs
Also See for MFX-C2828:
- User manual (364 pages) ,
- User's manual print functions (318 pages) ,
- User's manual copy operations (287 pages)
Table of Contents
Advertisement
1
Replacing the staple cartridge (Saddle stitcher SD-509)
The following procedure describes how to replace the staple cartridge for saddle stitcher SD-509.
This illustration shows an example where the saddle stitcher SD-509 and punch kit PK-517 are installed in
the optional finisher FS-527.
NOTICE
When moving the saddle stitcher, do not grab any part other than the handle, otherwise your hand or fingers
may be pinched.
When replacing the staple cartridge, be sure to check that the message is displayed. If the staple cartridge
is removed before the message is displayed, it will result in a failure.
Do not remove the remaining staples, otherwise the machine will not be able to staple after the cartridge is
replaced.
1-74
Replacing consumables
1.22
Advertisement
Table of Contents
