Alpine CVA-1005 Owner's Manual page 214

Remote Sensor
1
2
3
214
Remote Control
(RUE-4165 supplied with CVA-1005)
Replacing battery
Applicable battery: Use two "AA" sized dry
batteries.
Point the remote control transmitter toward
the remote sensor on the CVA-1005 and use
the remote control within 2 meters from the
CVA-1005.
Opening the battery cover.
Push on the cover and slide it as indicated by
the arrow then the cover will be removed.
Replacing the battery.
Remove the old batteries. Insert new ones
matching the (+) and (–) polarities as shown in
the diagram inside the remote control.
Closing the cover.
Push the cover in the arrow direction until a
click is heard.
English