Alpine CVA-1005 Owner's Manual page 132

1
2
3
132
1 5
2
3 4
RETURN
T-CORR
Audio Processor
Operation (Optional)
Adjusting Time -
Correction for 2-Way
Speaker System
Use this procedure to adjust the sound time
difference between the speakers.
Press and hold the FUNC (RETURN) button for
at least 2 seconds in the Divider mode.
The mode changes to the Divider Adjustment
mode.
Press the 3 (T-CORR.) button.
The mode changes to the Time Correction
Adjustment mode.
Press the rotary encoder and select the channel
you wish to adjust.
Each press changes the channels as follows:
When only one 2-way divider is connected:
L-Low R-Low
R-High/R R-High/L
When two 2-way dividers are connected:
L-Low R-Low
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
L-Low R-Low
When only one 3-way divider is connected:
L-Low R-Low L-Mid
When two 3-way dividers are connected:
L-Low R-Low L-Mid
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
L-Low R-Low L-Mid
English
F-High/L
F-High/R
L-High R-High
L-High R-High
R-Mid L-High R-High
R-Mid L-High R-High
R-Mid L-High R-High
(To be continued)