HP Kayak XW A2-U2-W2 Manual page 8

SCSI Disk Utilities
HP Kayak XW 0480 PC Workstation — Configuring a SCSI Accessory
•
Display <F6> Message During BIOS Initialization
When enabled, this option displays the message
SCSISelect(TM) Utility
disabled, this message is not displayed, although you can still press
the key for the SCSISelect utility. This option is enabled by
default.
•
BIOS Support for Bootable CD-ROM
When enabled, this option provides BIOS support for booting from a
CD-ROM drive. It is enabled by default.
•
BIOS Support for Int13 Extensions
When enabled, this option provides BIOS support for hard disk
drives with more than 1024 cylinders. It is enabled by default.
When the SCSI Disk Utilities are selected from the initial Options menu,
the SCSISelect utility scans the SCSI bus and lists all the SCSI devices
on the SCSI bus. The list shows the SCSI ID and name of each SCSI
device. You can use this list to discover the SCSI ID of any device on the
SCSI bus.
Use the and
display the
Format Disk
•
Format Disk
This utility can be used to perform a low-level format of a hard disk.
Most SCSI disks are pre-formatted and do not need low-level
formatting. You should note that this function can take several hours.
•
Verify Disk Media
This utility scans for media defects on the selected SCSI device.
Press the key to abort this utility.
8 English
during BIOS initialization. When
keys to highlight a device and press
/
Verify Media
Press <F6> for
menu.
to