HP Kayak XW A2-U2-W2 Manual page 3

Configure/View
Interface Settings Menu
The Options menu is displayed.
Would you like to configure the host adapter, or run the
SCSI disk utilities? Select the option and press <Enter>.
Press <F5> to switch between color and monochrome modes.
Configure/View Host Adapter Settings
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit
Use the and
the SCSISelect utility. Press
menu.
It is recommended that you do not change these settings.
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID . . . . . . . . . . . . . . 7
SCSI Parity Checking . . . . . . . . . . . . . . Enabled
Additional Options
Boot Device Options
SCSI Device Configuration
Advanced Configuration Options . . . . . . . . . Press <Enter>
<F6> - Reset to Host Adapter Defaults
BIOS Information
Interrupt (IRQ) Channel . . . . . . . . . . . . . . 15
I/O Port Address
HP Kayak XW 0480 PC Workstation — Configuring a SCSI Accessory
SCSISelect(TM) Utility v1.xxx
Options
SCSI Disk Utilities
keys and the
at any time to return to the previous
SCSISelect(TM) Utility v1.xxx
. . . . . . . . . . . . . . Press <Enter>
. . . . . . . . . . . Press <Enter>
. . . . . . . . . . . . . . . . . F800h
key to make selections in
English
3