Table of Contents
Advertisement
Chapter 7: Troubleshooting
■
Make sure that the IDE jumper settings on the back of the drive are set
correctly. For more information, see "Setting the IDE jumpers" on page 12.
■
Make sure that the SCSI IDs for all SCSI devices have been set correctly.
For more information, see "Setting the SCSI jumpers" on page 16.
■
Check your BIOS Setup utility to see if your computer supports Logical
Block Addressing (LBA). If your computer does not support LBA, the
maximum size for the hard drive is 2.1 GB. You may need to contact
Gateway Technical Support for information about upgrading your BIOS.
If your computer does not support LBA, enter the following drive settings
in the BIOS Setup utility:
■
If your new hard drive came with Windows already installed and Windows
does not work correctly, use the red Drivers CD, the Gateway System
Restoration Kit, or the Gateway System Restoration CD that originally came
with your computer to reinstall Windows. Go to "Setting Up the New Drive
Automatically" on page 35 and follow the appropriate instructions.
54
Cyl.
Heads
1024
16
Sectors
LZ
63
0
www.gateway.com
Write
Precomp
None
Hide quick links:
Advertisement
Table of Contents
