Gateway DX4320 Hardware Installation Manual page 48

Chapter 6: Setting up the New Drive Manually
7
If the new hard drive is a master (boot) drive, type
Number
- OR -
If the new hard drive is a slave drive, type
8
Press E
selected as the current fixed drive.
9
Type
opens.
10
Type
and your computer verifies the drive integrity.
11
Type
letters changed or added
12
Press E
13
Go to "Creating the extended partition" on page 46.
To partition your drive with FAT32:
1
Insert the System Restoration Kit CD or System Restoration CD into your CD
or DVD drive.
2
Restart your computer. The Main menu opens.
3
Close the Main menu.
4
Type
5
Type
6
If you have only one hard drive in your computer, go to Step 8.
- OR -
If you have more than one hard drive in your computer type
E
NTER
availability and status.
44
.
. The
FDISK Options
NTER
, then press E . The
1
NTER
, then press E . The
1
NTER
, then press E . The message
Y
NTER
appears.
.
SC
, then press E
fdisk
NTER
. Large disk support is enabled.
Y
. The
Change Current Fixed Disk Drive
www.gateway.com
for the
2
menu appears with the appropriate drive
or
Create Dos Partition
Create Primary DOS Partition
Primary DOS Partition created, drive
.
window appears showing drive
for the
1
Fixed hard drive
Fixed hard drive Number
menu
Logical DOS Drive
screen appears
, then press
5
.